USB Camera Module

USB IR Camera Module

USB IR Camera Module
USB IR Camera Module
USB IR Camera Module
USB IR Camera Module
USB IR Camera Module

Description

Reviews

Product introduction 
The camera module product made of the latest generation of digital processing chip of Matsuzaka and is equipped with the sensor 1064. It has the characteristics of high definition, good night vision effect, rare noise. It supports IR_CUT switcher and work with fill light so as to. guarantee the clarity and brightness of the night image and make the image can get the best visual effect during the day and night. 
In addition, this product also has automatic white balance, automatic electronic shutter and other functions. It is suitable for video surveillance in a small range of small shops, supermarkets, 24-hour stores, clothing stores, etc. It can also be used as the simplest computer camera.
It adopts ordinary computer USB2.0 interface, plug and play, fool-like operation, no need for acquisition card and power supply.
 Product Size
Interface definition J1 J2 J3
Interface function USB interface D/Nay synchronization interface IR_CUT
1 5V CDS ICR+
2 DM(D-) CDS ICR-
3 DP(D+)    
4 GND    
Appearance
There are no dents, scratches, cracks, deformations and stains on the surface of the product; the surface has uniform colour, no blistering, cracking, falling off and abrasion; metal parts are free of rust; the text marks are clear and complete.
Features
• Adapting 1/4〞1064 sensor    
• Supporting double filter switchers & D/N Synchronization  
• Advanced digital signal process technology
• Min Lux:0.1 Lux
• The inductive infrared light source and truly realizing zero illumination monitoring
• Auto Balance
• Auto AGC
Technical parameter
Image sensor 1064 Connector speed 480MB/S
Sensor size 1/4″CMOS Power 5V±5%
Scan system line-by-line scan Consumption Max 0.6W
Line Scan frenquency 30HZ Data output type Raw Data10bits
Field scan frequency 50HZ Video output MPJG/YUY2
Effective pixel 1280x720 Lens available M12(f=3.5MM)
Min Lux ≥0.1LUX atF1.2 Lens default M12  /  60°
Resolution selectable 1280x720 Working temperature -20℃~+60℃
S/N Ratio ≥40 dB Working humidity 30%-90%RH
Connector 1*4-pin1.5mm USB2.0 Supported system WindowsXP/vista/seven/8.1/Mac linux2.6.2(include UVC)
Dynamic Rang ≥80dB Size 32MM*32MM,38mm×38mm
Application
Quality contro lmethod
1. The camera examination should meet requirement of NO.1;

2. Using the calliper to measure the size of the camera, positioning holes, lens height and others, which should meet the requirements of 2;

3. The camera is connected to the display module or the displayer for detection, and the image cant appear the phenomenon such as distortion;

4. When the camera is working, using the oscilloscope to measure the video output amplitude of the video signal: 0.8~1.2VP-P/75Ω;

5. When the camera is connected to the displayer, and the standard colour card is placed 0.8 meters in front of the camera, the image on the observation monitor should be consistent with the real scene;

6. High and low temperature test, The temperature is maintained at 70 ° C for 2 h, the normal energy is applied, and the temperature is negative at 30 ° C for 2 h, the power-on test can work normally;

7. There must be no vignetting around the image;

8. Stability test, continuous aging for 24 hours, no failure should occur;

9. Camera minimum illumination test, camera minimum illumination reaches 1.0LUX. (no LED)
Test equipments used
1. Calliper with an accuracy of ±0.02mm
2. 24-colour standard colour card, grayscale comprehensive test chart
3. Camera module
4. Digital multimeter
5. Oscilloscope
6. DC regulated power supply, 14-inch colour monitor, lens with 3.6mm lens.
Share your thoughts   Showing 6 of 0 reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Upload Image
Notice: Ensure your image is no larger than 200KB before uploading.
Submit
Contact Us Now
Want to sign a NDA, get a quote or just learn more about our camera modules? Get directly in touch with your local office contact!
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Phone
Products can't be empty
Products you want
Message can't be empty
Verification code error
code
Clear
Contact Us Now
© 2019 Motoshot Technology Co.,Ltd        SiteMap.html    SiteMap.xml    Terms of Service      Privacy Policy
CAMEMAKE, The CAMEMAKE logo, and all together are trademarks of Motoshot Technology Co.,Ltd     BR NO. 69696963
Want to sign a NDA, get a quote or just learn more about our camera modules? Get directly in touch with your local office contact!
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error
code
Clear