Temperature Measurement Camera

Description

Function Feature

✓ PoE power supply and communication, spare the installation of AC power line

✓ Calibration is auto-updated or remotely controlled based on ambient environment to ensure precise temp measurement

✓ Pair with human body temp measurement camera and support auto calibration

✓ Support both Celsius and Fahrenheit

✓ 180° flip over of screen display based on different installation method

✓ Wi-Fi communication available

✓ Support MODBUS protocol

Product information

Operation and display

Mobile installation scenario

Ceiling-mounted scenario

Specification of Smart Human Body Temp Measurement Black Body

General

Production No.	ELT-BB64
Power Input	DC 12V@2A
Power Input	PoE+，IEEE.802.3at，12V@2A
Working Environment	0~40℃/ ≤80 RH
Dimension	9395120mm
Weight	287g
Installation	Tripod or pedestal installation, 1/4-20UNC screw
Installation	Ceiling-mounted (press ‘+’ and ‘-’ simultaneously to flip OLED screen vertically)

Function

Emitter Diameter	φ64mm
Effective Emissivity	0.975±0.003
Emittance Surface Balance	>95%
Stability	±0.1℃/10min (while heating becomes stable)
Temperature Resolution	±0.1℃
Status Code	"RUN": black body is heating up or cooling down automatically, normal "OK": when PV reaches SV, stable "ER0": error state, PT100 sensor connectivity issue "ER1": error state, processor ROM issue



Temp Configuration Range	30~40℃

Communication

RS485	2Pin, 3.81mm wiring terminal, 9600, 8, N, 1
Ethernet port	RJ45, 10/100Mbps
Communication	MODBUS RTU (for RS485 and Ethernet passthrough） Slave Address: 1 Baud rate: 9600 IP: 192.168.0.7 Login: admin Password: admin PV temperature value: 04 function code (read-only), register address: 30001, value: %s/10, unit ℃ SV temperature value: 03 function code (read-only), register address: 40001, value: %s/10, unit℃ 06 function code (write-only), register address: 40001, value: 300-400, beyond default value 350, corresponding temp value: %s/10, unit℃